NEVRADPCOMSILV | Adapter Profile Commercial Use

Open image in lightbox

Profiles

Locate a dealer near you

Specifications

Subtle and elegant profile for use in commercial areas. Use the profile to make the transition between a higher and a lower floor, e.g. at a door entrance. Can be used with clicked Vinyl floors. Extra wear-resistant quality aluminium, silver tone. Installation with the supplied screws and plugs (installation without sub-profile). Screw at an angle of 90° into the subfloor (see technical drawing above). Tip: avoid fixing the floor too firmly between the adapter profile and the subfloor. Make sure you can still slide a piece of paper between the profile and the Vinyl floor.

Dimensions

Height	7.5 mm
Length	2000 mm
Width	27 mm

Technical information

Content

Contents: 1 pre-drilled aluminium adapter profile (2000 x 27 x 7,5 mm), screws (stainless steel 3,5 x 35 mm) and plugs (5 x 25 mm)

Similar accessories

End Profile Silver 9,5 mm Floors
- Laminate Accessories
- End Profile Silver 9,5 mm Floors
- NEENP9SILVME270
- Aluminium profile, silver tone.
- Aluminium profile, silver tone.
Stair Profile Silver
- Laminate Accessories
- Stair Profile, Silver
- PGSTPSILVME250
- Stair nose. Fits flooring thickness 7 – 15 mm. Colour: silver. Surface: aluminium.
- Stair Profile, Silver
Adapter Profile
- Vinyl Accessories
- Adapter Profile - Silver
- NEVADPSILV
- This very slim and elegant profile can be used to make the transition between a higher and a lower floor. Can be used with clicked vinyl floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the adapter profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the adapter profile in the subprofile.
- Adapter Profile
Expansion Profile
- Vinyl Accessories
- Expansion Profile - Silver
- NEVEXPSILV
- This very slim and elegant profile can be used to cover the expansion joint between 2 floors of the same height e.g. at a door entrance or in a large room/corridor where an expansion joint is required. Can be used with Vinyl Click (+) floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the expansion profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the expansion profile in the subprofile.
- Expansion Profile
- Laminate Accessories
- Stair Profile Silver 9,5 mm Floors
- NESTP9SILVME25
- Laminate Accessories
- Stair Profile Silver 7-8 mm Floors
- NESTPSILVME25
End Profile
- Vinyl Accessories
- End Profile - Silver
- NEVENPSILV
- This very slim and elegant profile can be used to cover the expansion joint between your Vinyl floor and e.g. a wall, window or threshold, or as a connection to a carpet. Can be used with clicked (+) Vinyl floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the end profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the end profile in the subprofile.
- End Profile
End Profile Silver 7-8 mm Floors
- Laminate Accessories
- End Profile Silver 7-8 mm Floors
- NEENPSILVME270
- Aluminium profile, silver tone.
- Aluminium profile, silver tone.
End Profile Commercial Use
- Vinyl Accessories
- End Profile Commercial Use
- NEVRENPCOMSILV
- Subtle and elegant profile for use in commercial areas. Use the profile to cover the expansion joint between your Vinyl floor and e.g. a wall, window or threshold, or as a connection to a carpet. Can be used with clicked Vinyl floors. Extra wear-resistant quality aluminium, silver tone. Installation with the supplied screws and plugs (installation without sub-profile). Tip: avoid fixing the floor too firmly between the end profile and the subfloor. Make sure you can still slide a piece of paper between the profile and the Vinyl floor.
- End Profile Commercial Use