White Alpstone

For easy and fast renovation. Covers an existing wallbase. Adaptable size. Colour: paintable. Surface: foil. Core: MDF.

2400 x 16 x 129 mm

The Pergo® standard skirting board provides a perfectly matching finish for your floor. The plugs supplied help you to neatly connect the skirting boards, both along the wall and in an inner or outer corner. The skirting board is equipped with the patented Incizo® technology, which makes it easy to cut it down from a board with a height of 58 mm to a board with a height of 40 mm.

2400 x 12 x 58 mm

This very slim and elegant profile can be used to cover the expansion joint between your Vinyl floor and e.g. a wall, window or threshold, or as a connection to a carpet. Can be used with clicked (+) Vinyl floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the end profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the end profile in the subprofile.

2000 x 24 x 7 mm

This very slim and elegant profile can be used to cover the expansion joint between your Vinyl floor and e.g. a wall, window or threshold, or as a connection to a carpet. Can be used with clicked (+) Vinyl floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the end profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the end profile in the subprofile.

2000 x 24 x 7 mm

This very slim and elegant profile can be used to make the transition between a higher and a lower floor. Can be used with clicked vinyl floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the adapter profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the adapter profile in the subprofile.

2000 x 38 x 7 mm

This very slim and elegant profile can be used to cover the expansion joint between 2 floors of the same height e.g. at a door entrance or in a large room/corridor where an expansion joint is required. Can be used with Vinyl Click (+) floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the expansion profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the expansion profile in the subprofile.

2000 x 34 x 7 mm

This very slim and elegant profile can be used to cover the expansion joint between 2 floors of the same height e.g. at a door entrance or in a large room/corridor where an expansion joint is required. Can be used with Vinyl Click (+) floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the expansion profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the expansion profile in the subprofile.

2000 x 34 x 7 mm

This very slim and elegant profile can be used to make the transition between a higher and a lower floor. Can be used with clicked vinyl floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the adapter profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the adapter profile in the subprofile.

2000 x 38 x 7 mm

T-moulding and reducer in one. Plastic bottom rail. Suitable for height differences of 0 - 12.3 mm.

1860 x 47 x 16 mm

Subtle and elegant profile for use in commercial areas. Use the profile to make the transition between a higher and a lower floor, e.g. at a door entrance. Can be used with clicked Vinyl floors. Extra wear-resistant quality aluminium, silver tone. Installation with the supplied screws and plugs (installation without sub-profile). Screw at an angle of 90° into the subfloor (see technical drawing above). Tip: avoid fixing the floor too firmly between the adapter profile and the subfloor. Make sure you can still slide a piece of paper between the profile and the Vinyl floor.

Contents: 1 pre-drilled aluminium adapter profile (2000 x 27 x 7,5 mm), screws (stainless steel 3,5 x 35 mm) and plugs (5 x 25 mm)

This very slim and elegant profile can be used to cover the expansion joint between 2 floors of the same height e.g. at a door entrance or in a large room/corridor where an expansion joint is required. Can be used with Vinyl Click (+) floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the expansion profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the expansion profile in the subprofile.

2000 x 34 x 7 mm

This very slim and elegant profile can be used to cover the expansion joint between your Vinyl floor and e.g. a wall, window or threshold, or as a connection to a carpet. Can be used with clicked (+) Vinyl floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the end profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the end profile in the subprofile.

2000 x 24 x 7 mm

This very slim and elegant profile can be used to make the transition between a higher and a lower floor. Can be used with clicked vinyl floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the adapter profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the adapter profile in the subprofile.

2000 x 38 x 7 mm

This very slim and elegant profile can be used to make the transition between a higher and a lower floor. Can be used with clicked vinyl floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the adapter profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the adapter profile in the subprofile.

2000 x 38 x 7 mm

Finish off your Pergo floor perfectly. Cut the full profile to your desired shape with the included knife.

2000 x 45 x 8 mm

This very slim and elegant profile can be used to cover the expansion joint between 2 floors of the same height e.g. at a door entrance or in a large room/corridor where an expansion joint is required. Can be used with Vinyl Click (+) floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the expansion profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the expansion profile in the subprofile.

2000 x 34 x 7 mm

This very slim and elegant profile can be used to cover the expansion joint between your Vinyl floor and e.g. a wall, window or threshold, or as a connection to a carpet. Can be used with clicked (+) Vinyl floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the end profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the end profile in the subprofile.

2000 x 24 x 7 mm

The Incizo® profile enables you to create stairs that fit perfectly into your interior. Various stair finishes are possible!

2000 x 33 x 17 mm

Subtle and elegant profile for use in commercial areas. Use the profile to cover the expansion joint between your Vinyl floor and e.g. a wall, window or threshold, or as a connection to a carpet. Can be used with clicked Vinyl floors. Extra wear-resistant quality aluminium, silver tone. Installation with the supplied screws and plugs (installation without sub-profile). Tip: avoid fixing the floor too firmly between the end profile and the subfloor. Make sure you can still slide a piece of paper between the profile and the Vinyl floor.

Contents: 1 pre-drilled aluminium end profile (2000 x 16,5 x 8 mm), screws (stainless steel 3,5 x 35 mm) and plugs (5 x 25 mm)

Specifically developed for Pergo Vinyl Floors, the Pergo Vinyl Clean protects the TitanV™ top protective layer. Ideal for removing dirt, grease spots and heel marks, as well as for daily cleaning.

1000 ml

High quality mop set with extra long ergonomic handle and a mop cloth holder.

Contents: mop-cloth holder, high-quality mop

High-quality, transparent and elastic one-component silicone that creates an invisible and waterproof finishing around wallbases, mouldings, transitions, door frames, etc.

310 ml

Professional knife, perfect for precised and stable cutting. Ideal for cutting curves and shapes. 10 blades are included.

275 x 113 x 50 mm

Transparent strip on a roll for a waterproof finish of the scotia.

15000 x 8 x 5 mm

Repair wax. Repair the colour of damaged planks quickly and easily with wax in colours covering the Pergo wood palette. Contains 1 melting knife, 1 comb, addwaxional wax.

Contents: 1 melting knife, 1 comb, 7 wax blocks

Refill set for vinyl cutter knife. 4x10 blades per piece.

40 blades

This multifunctional glue is specifically developed for all applications with the Pergo solutions. Ideal for installing wallbases and mouldings. Suitable for all materials and substrates. Hybrid polymer, cures quickly with very high final strength.

290 ml

Fill up expansion joints with the PE Foamstrip with adhesive backing.

15000 x 8 x 5 mm

Laminate and Parquet Installation Set. Everything you need in one box. Contents tapping block, installation spacers in two sizes and pullbar.

Contents: tapping block, installation spacers in two sizes, pull bar

This stainless steel cover will elegantly finish off the joints around heating elements and pipes.

diameter 22 mm

This stainless steel cover will elegantly finish off the joints around heating elements and pipes.

diameter 15 mm